,

Small Size 30W Constant Current Triac Dimmable LED Driver

Features:

1. Input Voltage AC200-250V

2. LED phase-cut dimming driver, dimming range 2-100%

3. Suitable for RPC MOSFET dimmer and FPC TRAIC dimmer

4. Protections: short circuit/over voltage/over current

5. CE SAA C-TICK certificate

6. 3 years warranty

7. Size: 74*47*29mmmm

Contact & Share

Small Size 30W Constant Current Triac Dimmable LED Driver Features:

. Constant Current design

. Input Voltage AC200-250V

. LED phase-cut dimming driver, dimming range 2-100%

. Suitable for RPC MOSFET dimmer and FPC TRAIC dimmer

. Active PFC

. Protections: short circuit/over voltage/over current

. Silica gel heat conduction technology

. Natural cold wind

. Ultra small volume

. Suitable for LED home lighting and commercial lighting

. Safe no load protection device

. Economic and convenient installation

. Conform to the world lighting equipment safety standards

. Protection class II

. Three years warranty

. CE SAA C-TICK certificate

. Size: 74*47*29mm

Small Size 30W Constant Current Triac Dimmable LED Driver Model list:

Series Model Input Power PF Output Voltage Output Current
PE283
18-30W
PE283B4255 PE283B:
AC200V-250V

PE283A:
AC90-130V

23.1W 0.88-0.91PF 25-42V 550mA
PE283B4270 29.4W 25-42V 700mA
PE283B3875 28.5W 25-38V 750mA
PE283B7035 24.5W 43-70V 350mA
PE283B6050 30W 43-60V 500mA

Small Size 30W Constant Current Triac Dimmable LED Driver Application:

Triac dimming LED driver are commonly used in various types of lighting fixtures and scenes.

1. Residential lighting

2. Commercial lighting

3. Hospitality and Entertainment lighting

4. Architectural Lighting

5. Outdoor Lighting

6. Art Galleries and Museums lighting.

Small Size 30W Constant Current Triac Dimmable LED Driver Specification:

Model PE283B4270 PE283B4260 PE283B3875 PE283B7035 PE283B6050
OUTPUT Output Voltage 25-42Vdc 25-42Vdc 25-38Vdc 43-70Vdc 43-60Vdc
Max Output Voltage 42Vdc 42Vdc 38Vdc 70Vdc 60Vdc
Non-load Output Voltage 45Vdc 45Vdc 45Vdc 75Vdc 65Vdc
Output Current 700mA 600mA 750mA 350mA 500mA
Output Power 17.5W~29.4W 15W~25.2W 18.75W~28.5W 15W~24.5W 21.5W~30W
Strobe Level Lower flicker(8%)
Dimming Range 2~100%,
PWM Dimming Frequency
Current Accuracy ±5%
Ripple & Noise =500mv p-p
INPUT Dimming Interface Triac Leading edge/Tralling edge
Input Voltage Range 200-250Vac
Frequency 50/60Hz
Input Current <0.16A <0.16A <0.16A <0.16A <0.16A
Power Factor PF>0.9(at full load) PF>0.9(at full load) PF>0.9(at full load) PF>0.9(at full load) PF>0.9(at full load)
THD 230Vac@THD <20% (at full load)
Efficiency(typ.) 85% 85% 87% 87% 87%
Inrush Current(typ.) Cold start2.04A Cold start1.98A Cold start1.9A Cold start1.9A Cold start2.06A
Anti Surge L-N: 1.5kV
Leakage Current <0.25mA/230Vac
ENVIRONMENT Working Temperature ta: 55 °C tc: 85 °C
Working Humidity 20 ~ 95%RH, non-condensing
Storage Temp., Humidity -40 ~ 80 °C , 10~95%RH
Temp. Coefficient ±0.03%/°C(0-50)°C
Vibration 10~500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes.
PROTECTION Over-heat Protection Intelligently adjusting or turning off the output current if the PCB temperature ≥110°C, , auto recovers.
Over Load Protection Shut down the output when rated power≥102%, auto recovers.
Short Circuit Protection Shut down automatically if short circuit occurs, auto recovers.
Non-load Protection Shut down the output if no load, auto recovers when load back to normal.
SAFETY & EMC Withstand Voltage I/P-O/P: 3750Vac
Isolation Resistance I/P-O/P: 100MΩ/500VDC/25°C/70%RH
Safety Standards IEC/EN61347-1, IEC/EN61347-2-13
EMC Emission EN55015, EN61000-3-2 Class C, IEC61000-3-3
EMC Immunity EN61000-4-2,3,4,5,6,8,11, EN61547
Strobe Test Standard IEEE 1789
OTHERS Dimension 76×61.5×29/78mm(L×W×H/D)
Packing PE bag
Weight(G.W.) 150±10g

Scroll to Top